Search

ANSV-AIT8S2M

ANSV-AIT8S2M

  • 8X10/100/1000 MBPS PORT SUPPORT POE 3AF/AT/BT.
  • SUPPORT UPLINK PORT 2×10/100/1000MBPS SFP
  • SUPPORT 1 CONSOLE PORT TO CONFIGURE SWITCH BY
  • SUPPORT TOTAL POWER BUDGET MAXIMUM 240
  • SINGLE PORT POWER OUTPUT MAXIMUM 30/90WATT.
  • SUPPORT BACKPLANE BANDWIDTH SPEED 56GBPS
  • HIGH PERFORMANCE CHIPSET, NO LAG
  • WEB MANAGMENT LAYER-2
  • REDUNDANT POWER INPUT
  • ELECTROSTATIC DISCHARGE UPTO 8
  • LIGHTINING PROTECTION UPTO 6
  • PLUG-N-PLUG FOR EASY TO
  • FANLESS LOW HEAT
Indoor Air Quality Monitoring Motion Detection Water Leak Detection Distance Detection License Plate Recognition
Indoor Air Quality Monitoring Motion Detection Water Leak Detection Distance Detection License Plate Recognition
Hardware Specification
 

 

 

Network Ports

8×10/100/1000Mbps RJ45 PoE

Port 1~2 support 24V/48V   (Single port power Maximum 30W)

Port 3~4 support PoE bt         (Single port power Maximum 90W) Port 5~8 support PoE at/af (Single port power Maximum 30W)

2×10/100/1000Mbps SFP Port
1xConsole Port
 

Network Protocol Standard

IEEE 802.3x, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3q, IEEE

802.3q/p, IEEE 802.1w, IEEE 802.1d, IEEE 802.1S, IEEE 802.3z 1000BASE−X

STP(Spanning Tree Protocol), RSTP/MSTP( Rapid Spanning Tree Protocol), EPPS ring network protocol, EAPS ring network protocol, AVAIVI: 802.3AF/AT/HiPoE/BT, AVAIVI: AUTO 24V/48V PSE

Single Port Output Up to 30/90Watt Max.
PoE Power Budget 240 Watt ( DC−48V/5Amp)
Transmission Mode Store and Forward (full wirespeed)
VLAN Mode Supported
Backplane Bandwidth 56Gbps
Packet Forwarding rate 14.44Mpps
 

Forwarding Rate

10Base−T: 14880PPS
100Base−T: 148800PPS/port
1000BASE−T:1488000PPS/port
MAC Address MAC address table 8K
Buffer 4.1M
Flash 16M
RAM 128M
Port Function Power, SYS, Link/Act:10/100/1000Mbps, POE+
 

 

 

LED Indicator

Port 1~2 (Green=48V;Orange=24V) Link port (Green=LINK LED)

Port 3~8 (Green=LINK LED;Orange=POE LED) LED Indicator9~10:(SFP LED)

PWR:(Power/system LED) P1:(Master power LED) P2:(Slave power LED)

HW:(Ring network ON LED)

 

 

 

 

 

Function Interface

1x Switch for quick formation of ring network

2x Interface of independent power input, having under− and over−voltage protection 1x Interface of wide voltage alarm input at a range of DC5−57V

1x Interface of alarm output and relay output, can define various custom condition trigger

1x Interface of environmental temperature and humidity detection, can make real−time monitoring of the environment

Real−time system of crucial voltage monitoring and alarm output function

Real−time system temperature,environment temperature,humidity and alarm output function Real−time detection and display of input voltage,current,power

Multiple custom port control and intelligent management

 

Power Input

Two group of independent power input SW:DC12−57V

PoE:DC37−57V

Operating Temperature −40°C ~ +80°C
Operating humidity 10%~95% maximum relative humidity, non−condensing
Lightning Protection 6KV & ESD 8KV
Weight 1.3kg
Casing Metal (DIN Rail type)
Dimension 160mm x 130mm x50mm
Countries
Covered
0 +
Successful Implementations
0 +
Satisfied
Clients
0 +
Customer Satisfaction
0 %